Install AAHC ISO¶

Accessing the ISO file¶

1. Go to Applied Analytics in the Logpoint Help Center.

2. Enter your credentials and log in.

3. Click Applied Analytics For Healthcare v1.8.0 ISO.

4. Download the ZIP file from Download.

5. Extract the ZIP file to obtain the file.

Installing the AAHC v1.8.0 ISO¶

1. Boot your system with the ISO file.

2. On Network connections, you can manually configure the network interfaces or proceed with the default configurations. By default, AAHC uses the IPv4 protocol with Automatic (DHCP) configurations for the first network interface.

Network connections screen¶

3. Click Done.

4. The AAHC ISO automatically partitions your storage devices for the installation using the following sizes:

The remaining space is used for the following volumes:

Automatic partitioning of storage devices¶

5. Select Done.

6. Select Continue to start the installation process.

Starting the installation process¶

7. Select Reboot Now when prompted.

8. After the installation completes, you must either manually eject the boot disk or select the option to boot from the hard drive from the Boot Manager. If you don’t, the entire process will repeat.

9. Log in using the following credentials:

   Username: web-admin
   Password: changeme
   

10. Change the password immediately using the passwd command.

11. The README.txt file in the home directory of the web-admin user gives you an overview of the actions that can be carried out.

12. Use the ifconfig command to view the IP address of the installed AAHC machine.

13. Enter the IP address in your browser to access the AAHC Interface. Log in with the following credentials:

    Username: admin
    Password: !am@aaHc
    

14. Change the password immediately.

Configuring network interfaces¶

1. To configure a network interface, select the relevant interface.

Configuring eth0 interface¶

2. Select Edit IPv4.

3. Select a Method.

   • If you choose Automatic (DHCP), the network interface settings are automatically set.

   • If you choose Manual, enter a Subnet, Address, Gateway, Name servers, and Search domains.

Configuring network connection¶

4. Select Save.

Customizing storage partitions during installation¶

1. In Storage Configuration, select Reset.

Automatic partitioning of storage devices¶

2. Select Use As Boot Device for the device you want to boot AAHC on.

Use As Boot Device¶

3. Select Add GPT Partition for an available device.

Adding GPT partition¶

4. Enter Size. The recommended size is at least 8GB for a new partition.

Selecting swap format¶

5. Select swap in Format and select Create.

6. Select Add GPT Partition again for the remaining size.

7. Select Leave unformatted in Format and select Create. This unformatted partition can be used to hold the logical volume group.

Selecting Leave unformatted format¶

8. Select Create Volume Group (LVM) to create a new volume group.

Selecting Create LVM¶

9. Enter a name for the volume group and select Create.

Creating LVM¶

10. In the new volume group, select Create Logical Volume.

Selecting Create Logical Volume¶

11. Enter a Name, Size, Format, and Mount point for the new logical volume.

Creating Logical Volume¶

You must configure at least the following logical volumes before you can proceed with the installation:

12. Select Done after finalizing your storage configurations.